AKROTEK®
PPS GF 30 natural (8836)PPS GF 30
AKROTEK® PPS GF 30 natural (8836) is a 30% glass fibre reinforced Polyphenylene sulfide with high rigidity and strength, as well as high temperature and chemical resistance.
Features
Properties
Na
Na
Na
General Properties
Humidity absorption
ISO 1110
Documents
Discover all the technical specifications at a single glance here.
Processing information
The values mentioned are recommendations. We only recommend desiccant / dry air dryers or vacuum dryers. Too long a drying time and the resulting residual moisture content below the lower limit can lead to filling problems and surface defects. The specified drying time refers to closed and undamaged bagged material. When processing from previously opened bags or from octabins with polyolefin inliners, a longer drying time may be necessary. It is recommended to check the residual moisture content after the drying process.
Drying time
2 - 6 h
Drying temperature (τ ≤ -30°C)
120 - 140 °C
Processing moisture
<0,02 %
Feed section
60 - 100 °C
Temperature Zone 1 - Zone 4
320 - 340 °C
Nozzle temperature
330 - 350 °C
Melt temperature
320 - 340 °C
Mold temperature
>140 °C
Holding pressure, spec.
300 - 800 bar
Back pressure, spec.
<50 bar
Injection speed
Slow - Fast - Slow
Screw speed
5 - 12 m/min
Applications
Explore more exciting application examples that illustrate how our products can be beneficial to you in various situations and industries.
Disclaimer
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.