AKROMID®
T9 GF 15 FR LA black (8197)PPA GF15 FR(40)
AKROMID® T9 GF 15 FR LA black (8197) is a flame retardant, 15% glass fibre reinforced polyphthalamide. The product is based on PA9T and has a significantly lower moisture absorption compared to conventional PA6T grades. As a result, the glass transition area is much more constant and even in the conditioned state, the product impresses with its medium strength and stiffness. Due to its high temperature and media resistance, this material is suitable for technical components that come into contact with chemicals. The flame retardant system is free of red phosphorus and halogens. This type is laser-markable.
Features
Properties
6.000MPa
107MPa
48kJ/m²
Mechanical Properties
Tensile modulus
ISO 527-2
Tensile stress at break
ISO 527-2
Tensile strain at break
ISO 527-2
Charpy impact strength
ISO 179-1/1eU
Charpy notched impact strength
ISO 179-1/1eA
Thermal Properties
Melting temperature
ISO 11357-3
Flammability
Burning rate
UL 94
GWFI
IEC 60695-2-12
Burning rate (<100 mm/min)
FMVSS 302
General properties
Density
ISO 1183
Molding shrinkage
ISO 294-4
Electrical Properties
Comparative tracking index
IEC 60112
Documents
Discover all the technical specifications at a single glance here.
Processing information
The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problem and surface defects.
Drying time
0 - 4 h
Drying temperature (τ ≤ -30°C)
120 °C
Processing moisture
0,02 - 0,08 %
Feed section
60 - 90 °C
Temperature Zone 1 - Zone 4
300 - 340 °C
Nozzle temperature
310 - 350 °C
Melt temperature
310 - 340 °C
Mold temperature
120 - 160 °C
Holding pressure, spec.
300 - 800 bar
Back pressure, spec.
50 - 150 bar
Injection speed
medium to high
Screw speed
8 - 15 m/min
Applications
Explore more exciting application examples that illustrate how our products can be beneficial to you in various situations and industries.
Disclaimer
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.