AKROMID®

Preliminary

A28 GF 33 1 LA black (6686)PA66 GF33

AKROMID® A28 GF 33 1 LA black (6686) is a 33% glass fiber reinforced, easy flowing polyamide 6.6. The material is characterised by good processability due to its very good flowability. Owing to its high stiffness and strength, it is perfectly suitable for technical parts in industrial engineering and in the automotive industry. The compound is laser markable.

Features

heat stabilised 130
laser markable
easy flow

Properties

Modulus

11.000MPa

Strength

205MPa

Impact

85kJ/m²

Mechanical Properties

Tensile modulus

ISO 527-2

1 mm/min | d.a.m.
11000 MPa

Tensile stress at break

ISO 527-2

5 mm/min | d.a.m.
205 MPa

Tensile strain at break

ISO 527-2

5 mm/min | d.a.m.
2,8 %

Charpy impact strength

ISO 179-1/1eU

23°C | d.a.m.
85 kJ/m²

Charpy notched impact strength

ISO 179-1/1eA

23°C | d.a.m.
14 kJ/m²

Thermal Properties

Melting temperature

ISO 11357-3

DSC, 10K/min
262 °C

General Properties

Density

ISO 1183

23°C
1,37 g/cm³

Humidity absorption

ISO 1110

70°C, 62% r.H.
1,9 - 2,1 %

Water absorption

ISO 62

23°C, saturated
5,2 - 5,7 %

Molding shrinkage

ISO 294-4

flow
transverse
0,1 - 0,3 %
0,7 - 0,9 %

Disclaimer

All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.