AKROLEN®
NEXT PP LGF 40 2 black (8488BMBCI)PP LGF40
AKROLEN® NEXT PP LGF 40 2 black (8488BMBCI) is based on biomass-balanced polypropylene copolymer. With 40% long glass fiber reinforcement, very high stiffness and strength can be achieved. The materials very good surface quality as well as the outstanding UV-stability make it the product of your choice for technical parts which are exposed to UV radiation. The material is certified according to ISCC PLUS. 80% of the fossil raw materials required for manufacturing this product were replaced by sustainable biomass-balanced PP (≙ allocation factor).
Features
Regulatory
Properties
10.100MPa
140MPa
81kJ/m²
Sustainability
Allocation factor
only valid for ISCC PLUS/REDcert² certified products
Mechanical Properties
Tensile modulus
ISO 527-2
Tensile stress at break
ISO 527-2
Tensile strain at break
ISO 527-2
Charpy impact strength
ISO 179-1/1eU
Charpy notched impact strength
ISO 179-1/1eA
Thermal Properties
Temperature of deflection under load HDT/A
ISO 75
Melting temperature
ISO 11357-3
General properties
Density
ISO 1183
Molding shrinkage
ISO 294-4
Documents
Discover all the technical specifications at a single glance here.
Processing information
The values mentioned are recommendations. We only recommend desiccant / dry air dryers or vacuum dryers. Too long a drying time and the resulting residual moisture content below the lower limit can lead to filling problems and surface defects. The specified drying time refers to closed and undamaged bagged material. When processing from previously opened bags or from octabins with polyolefin inliners, a longer drying time may be necessary. It is recommended to check the residual moisture content after the drying process.
Drying time
0 - 3 h
Drying temperature (τ ≤ -30°C)
80 °C
Processing moisture
≤ 0,1 %
Feed section
40 - 80 °C
Temperature Zone 1 - Zone 4
200 - 255 °C
Nozzle temperature
200 - 255 °C
Melt temperature
215 - 265 °C
Mold temperature
30 - 80 °C
Holding pressure, spec.
300 - 800 bar
Back pressure, spec.
10 - 30 bar
Injection speed
slow to medium
Screw speed
5 - 15 m/min
Applications
Explore more exciting application examples that illustrate how our products can be beneficial to you in various situations and industries.
Disclaimer
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.