Select your fitting and find the right compound for your intend
AKROMIDĀ®
A3 black (7557)
PA66
AKROMIDĀ® A3 black (7557) is an unreinforced, UV stabilised polyamide 6.6.
3.200MPa
80MPa
180kJ/mĀ²
AKROMIDĀ® A3 black (7557) is an unreinforced, UV stabilised polyamide 6.6.
AKROLOYĀ®
PA GF 50 white (5137)
PA66+PA6I/6T GF50
AKROLOYĀ® PA GF 50 white (5137) is a 50% glass fibre reinforced, semi-aromatic polyamide blend with very high stiffness and strength, even in conditioned state.
20.000MPa
250MPa
105kJ/mĀ²
AKROLOYĀ® PA GF 50 white (5137) is a 50% glass fibre reinforced, semi-aromatic polyamide blend with very high stiffness and strength, even in conditioned state.
AKROMIDĀ®
B3 GF 35 S1 natural (920)
PA6-I GF35
AKROMIDĀ® B3 GF 35 S1 natural (920) is a 35% glass fibre reinforced, cold impact strength polyamide 6 with high stiffness and strength and light inherent color
11.000MPa
190MPa
80kJ/mĀ²
AKROMIDĀ® B3 GF 35 S1 natural (920) is a 35% glass fibre reinforced, cold impact strength polyamide 6 with high stiffness and strength and light inherent color
AKROMIDĀ®
B3 GF 60 natural (2476)
PA6 GF60
AKROMIDĀ® B3 GF 60 natural (2476) is a 60% glass fibre reinforced polyamide 6 with very high rigidity and strength and light inherent color
21.000MPa
240MPa
90kJ/mĀ²
AKROMIDĀ® B3 GF 60 natural (2476) is a 60% glass fibre reinforced polyamide 6 with very high rigidity and strength and light inherent color
AKROMIDĀ®
A3 GFM 25/15 1 black (3335)
PA66 (GF25+MD15)
AKROMIDĀ® A3 GFM 25/15 1 black (3335) is a 25% glass fibre reinforced, 15% mineral filled, heat stabilised polyamide 6.6 with good surface and dimensional stability
10.000MPa
150MPa
50kJ/mĀ²
AKROMIDĀ® A3 GFM 25/15 1 black (3335) is a 25% glass fibre reinforced, 15% mineral filled, heat stabilised polyamide 6.6 with good surface and dimensional stability
AKROTEKĀ®
PK-HM black (4953)
PK
AKROTEKĀ® PK-HM black (4953) - Polyketon, Tribology, friction and wear, chemical resistance
1.500MPa
60MPa
180kJ/mĀ²
AKROTEKĀ® PK-HM black (4953) - Polyketon, Tribology, friction and wear, chemical resistance
AKROTEKĀ®
PK-HM 8 black (6246)
PK
AKROTEKĀ® PK-HM 8 black (6246) is an unreinforced, high viscosity polyketone. The material is suitable for drinking water contact and meets the requirements according to ACS and WRAS. Moreover the material corresponds to the European food guideline EU 10/2011, but not to the American FDA 21 CFR.
1.600MPa
60MPa
180kJ/mĀ²
AKROTEKĀ® PK-HM 8 black (6246) is an unreinforced, high viscosity polyketone. The material is suitable for drinking water contact and meets the requirements according to ACS and WRAS. Moreover the material corresponds to the European food guideline EU 10/2011, but not to the American FDA 21 CFR.
AKROMIDĀ®
AKROMIDĀ® A3 GF 30 HU natural (6661) is a 30% glass fiber reinforced polyamide 6.6. It is characterised by high stiffness and strength. Furthermore, the material is heat stabilised and therefore perfectly suitable for technical parts in industrial engineering and in the automotive industry. Additionally, it is listed at UL in all colors. The material has a light inherent color.
Features
Regulatory
Properties
10.500MPa
200MPa
75kJ/mĀ²
ISO 527-2
ISO 527-2
ISO 527-2
ISO 179-1/1eU
ISO 179-1/1eA
UL 746C
UL 746B
UL 746B
UL 746B
ISO 75
ISO 75
ISO 75
ISO 11357-3
IEC 60216
UL 94
UL 746A
UL 746A
FMVSS 302
ISO 1183
ISO 294-4
DIN EN IEC 62631-3-2
IEC 60112
ASTM D3638
IEC 60243
UL 746A
Disclaimer
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKROĀ®, AKROMIDĀ®, AKROLENĀ®, AKROLOYĀ®, AKROTEKĀ®, ICXĀ® and PRECITEĀ® are registered trademarks of the Feddersen Group.
Contact
Would you like to learn more about AKRO-PLASTIC GmbH? Contact us! We will be happy to help you.