Select your fitting and find the right compound for your intend
AKROMIDĀ®
B3 GF 60 black (2497)
PA6 GF60
AKROMIDĀ® B3 GF 60 black (2497) is a 60% glass fibre reinforced polyamide 6 with very high rigidity and strength
21.000MPa
240MPa
90kJ/mĀ²
AKROMIDĀ® B3 GF 60 black (2497) is a 60% glass fibre reinforced polyamide 6 with very high rigidity and strength
AKROMIDĀ®
A3 CF 20 black (3132)
PA66 CF20
AKROMIDĀ® A3 CF 20 black (3132) is a 20% carbon fibre reinforced polyamide 6.6 with high flexural strength and good sliding properties
15.000MPa
200MPa
40kJ/mĀ²
AKROMIDĀ® A3 CF 20 black (3132) is a 20% carbon fibre reinforced polyamide 6.6 with high flexural strength and good sliding properties
AKROMIDĀ®
A3 GF 25 3 black (3094)
PA66 GF25
AKROMIDĀ® A3 GF 25 3 black (3094) is a 25% glass fibre reinforced, nucleated polyamide 6.6 with high stiffness and strength
8.500MPa
160MPa
50kJ/mĀ²
AKROMIDĀ® A3 GF 25 3 black (3094) is a 25% glass fibre reinforced, nucleated polyamide 6.6 with high stiffness and strength
AKROMIDĀ®
A3 GK 30 natural (3689)
PA66 GB30
AKROMIDĀ® A3 GK 30 natural (3689) - PA 6.6, 30% glass beads reinforced, good surface, low warpage
5.000MPa
90MPa
28kJ/mĀ²
AKROMIDĀ® A3 GK 30 natural (3689) - PA 6.6, 30% glass beads reinforced, good surface, low warpage
AKROMIDĀ®
A3 1 L black (4652)
PA66 + PP
AKROMIDĀ® A3 1 L black (4652) - unreinforced PA6.6/PP-Blend lightweight, cost reduced
2.300MPa
54MPa
180kJ/mĀ²
AKROMIDĀ® A3 1 L black (4652) - unreinforced PA6.6/PP-Blend lightweight, cost reduced
AKROMIDĀ®
A3 GK 30 6 black (6670)
PA66 GK30
AKROMIDĀ® A3 GK 30 6 black (6670) - 30% glass bead, inorganic high temperature stabilised, polyamide 6.6, low warpage, high surface appearance
4.600MPa
86MPa
20kJ/mĀ²
AKROMIDĀ® A3 GK 30 6 black (6670) - 30% glass bead, inorganic high temperature stabilised, polyamide 6.6, low warpage, high surface appearance
AKROTEKĀ®
PK-VM GF 20 natural (6982)
PK GF20
AKROTEKĀ® PK-VM GF 20 8 natural (6982) is a 20% glass fibre reinforced, low viscous polyketone with average stiffness and strength and light inherent color. Please note that the material is NOT suitable anymore for drinking water contact and does NOT meet the requirements according to KTW, DVGW W270, ACS, WRAS as well as NSF61 and does NOT correspond to the European food guideline EU 10/2011 as well as to the American FDA 21 CFR guideline.
5.800MPa
100MPa
50kJ/mĀ²
AKROTEKĀ® PK-VM GF 20 8 natural (6982) is a 20% glass fibre reinforced, low viscous polyketone with average stiffness and strength and light inherent color. Please note that the material is NOT suitable anymore for drinking water contact and does NOT meet the requirements according to KTW, DVGW W270, ACS, WRAS as well as NSF61 and does NOT correspond to the European food guideline EU 10/2011 as well as to the American FDA 21 CFR guideline.
AKROMIDĀ®
AKROMIDĀ® T9 GF 15 S1 black (7820) is a 15% glass fibre reinforced, cold impact strength polyphthalamide with medium stiffness and strength, as well as high chemical resistance. The compound is based on PA9T and has lower moisture uptake than conventional PA6T variants. This leads to a significantly higher consistency of the glass transition temperature and higher strength at elevated temperatures especially in conditioned state.
Features
Properties
5.000MPa
120MPa
73kJ/mĀ²
ISO 527-2
ISO 527-2
ISO 527-2
ISO 179-1/1eU
ISO 179-1/1eA
ISO 75
ISO 75
ISO 11357-2
ISO 11357-3
UL 94
Disclaimer
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKROĀ®, AKROMIDĀ®, AKROLENĀ®, AKROLOYĀ®, AKROTEKĀ®, ICXĀ® and PRECITEĀ® are registered trademarks of the Feddersen Group.
Contact
Would you like to learn more about AKRO-PLASTIC GmbH? Contact us! We will be happy to help you.