Find the right compound
Select your fitting and find the right compound for your intend
AKROTEK®
PK-HM black (4953)
PK
AKROTEK® PK-HM black (4953) - Polyketon, Tribology, friction and wear, chemical resistance
1.500MPa
60MPa
180kJ/m²
AKROTEK® PK-HM black (4953) - Polyketon, Tribology, friction and wear, chemical resistance
AKROMID®
B28 GF 15 natural (6940)
PA6 GF 15
AKROMID B28 GF 15 natural (6940) - PA 6, glass fiber reinforced, easy flow, good surface, bus fire standard ECE R 118.03, medium stiffness and strength.
5.300MPa
120MPa
39kJ/m²
AKROMID B28 GF 15 natural (6940) - PA 6, glass fiber reinforced, easy flow, good surface, bus fire standard ECE R 118.03, medium stiffness and strength.
AKROMID®
B3 GF 30 5 black (8536)
PA6 GF30
AKROMID® B3 GF 30 5 black (8536) - PA6, 30% GF, high heat stabilised, UV stabilised, technical parts in industrial engineering, automotive industry, agriculture.
9.500MPa
170MPa
60kJ/m²
AKROMID® B3 GF 30 5 black (8536) - PA6, 30% GF, high heat stabilised, UV stabilised, technical parts in industrial engineering, automotive industry, agriculture.
AKROMID®
A3 5 black (4701)
PA66
AKROMID® A3 5 black (4701) is an unreinforced, high temperature stabilised polyamide 6.6
3.500MPa
90MPa
180kJ/m²
AKROMID® A3 5 black (4701) is an unreinforced, high temperature stabilised polyamide 6.6
PRECITE®
K GF 15 natural (7439)
PBT-PET- GF 15
PRECITE K GF 15 natural (7439) is a 15% glass fibre reinforced PBT/PET blend with high strength and improved surface finish.
6.000MPa
115MPa
30kJ/m²
PRECITE K GF 15 natural (7439) is a 15% glass fibre reinforced PBT/PET blend with high strength and improved surface finish.
AKROMID®
B3 GF 20 black (2491)
PA6 GF20
AKROMID® B3 GF 20 black (2491) is a 20% glass fibre reinforced polyamide 6 with medium stiffness and strength
6.800MPa
150MPa
73kJ/m²
AKROMID® B3 GF 20 black (2491) is a 20% glass fibre reinforced polyamide 6 with medium stiffness and strength
AKROMID®
A3 GK 30 natural (3689)
PA66 GB30
AKROMID® A3 GK 30 natural (3689) - PA 6.6, 30% glass beads reinforced, good surface, low warpage
5.000MPa
90MPa
28kJ/m²
AKROMID® A3 GK 30 natural (3689) - PA 6.6, 30% glass beads reinforced, good surface, low warpage
AKROLOY®
PA FGF 60 black (6765)PA66 + PA6I/6T GF 60
AKROLOY® PA FGF 60 black (6765) is a 60% flat glass fiber reinforced, semi-aromatic polyamide blend. Due to the flat glass fiber, the material is characterised by significantly improved properties 90° to the flow direction as well as low warpage. Even in conditioned state, it impresses with very high stiffness and strength owing to its lower moisture uptake. The material is perfectly suitable for parts where dimensional stabilitiy is required. Furthermore, it can be used as an alternative for aluminium and zinc diecast alloys.
Features
Properties
20.000MPa
290MPa
90kJ/m²
Mechanical Properties
Tensile modulus
ISO 527-2
Tensile stress at break
ISO 527-2
Tensile strain at break
ISO 527-2
Flexural modulus
ISO 178
Flexural strength
ISO 178
Flexural strain at break
ISO 178
Charpy impact strength
ISO 179-1/1eU
Thermal Properties
Temperature of deflection under load HDT/A
ISO 75
General properties
Density
ISO 1183
Humidity absorption
ISO 1110
Molding shrinkage
ISO 294-4
Rheological Properties
Flowability
AKRO
Disclaimer
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.
Contact
Do you have any questions? We are happy to help.
Would you like to learn more about AKRO-PLASTIC GmbH? Contact us! We will be happy to help you.