Find the right compound
Select your fitting and find the right compound for your intend
AKROMID®
B3 1 natural (2499)
PA6
AKROMID® B3 1 natural (2499) is an unreinforced, heat stabilised polyamide 6 with light inherent color
3.600MPa
85MPa
180kJ/m²
AKROMID® B3 1 natural (2499) is an unreinforced, heat stabilised polyamide 6 with light inherent color
AKROTEK®
PK-HM 8 natural (6145)
PK
AKROTEK® PK-HM 8 natural (6145) - Polyketon, unreinforced, Tribology, friction and wear, chemical resistance, EU 10/2011, FDA 21 CFR
1.400MPa
60MPa
180kJ/m²
AKROTEK® PK-HM 8 natural (6145) - Polyketon, unreinforced, Tribology, friction and wear, chemical resistance, EU 10/2011, FDA 21 CFR
AKROTEK®
PK-HM 8 black (6246)
PK
AKROTEK® PK-HM 8 black (6246) is an unreinforced, high viscosity polyketone. The material is suitable for drinking water contact and meets the requirements according to ACS and WRAS. Moreover the material corresponds to the European food guideline EU 10/2011, but not to the American FDA 21 CFR.
1.600MPa
60MPa
180kJ/m²
AKROTEK® PK-HM 8 black (6246) is an unreinforced, high viscosity polyketone. The material is suitable for drinking water contact and meets the requirements according to ACS and WRAS. Moreover the material corresponds to the European food guideline EU 10/2011, but not to the American FDA 21 CFR.
AKROTEK®
PK-VM 8 black (6466)
PK
AKROTEK® PK-VM 8 black (6466) - Polyketon, Tribology, friction and wear, chemical resistance, food, drinking water, EU 10/2011
1.600MPa
60MPa
180kJ/m²
AKROTEK® PK-VM 8 black (6466) - Polyketon, Tribology, friction and wear, chemical resistance, food, drinking water, EU 10/2011
AKROMID®
A3 GK 30 6 natural (6774)
PA66 GB30
AKROMID® A3 GK 30 6 natural (6774) - 30% glass bead, inorganic high temperature stabilised, polyamide 6.6, low warpage, high surface appearance
4.600MPa
90MPa
25kJ/m²
AKROMID® A3 GK 30 6 natural (6774) - 30% glass bead, inorganic high temperature stabilised, polyamide 6.6, low warpage, high surface appearance
AKROMID®
B3 GF 25 natural (2471)
PA6 GF25
AKROMID® B3 GF 25 natural (2471) is a 25% glass fibre reinforced polyamide 6 with high stiffness and strength and light inherent color
8.500MPa
160MPa
85kJ/m²
AKROMID® B3 GF 25 natural (2471) is a 25% glass fibre reinforced polyamide 6 with high stiffness and strength and light inherent color
AKROMID®
B3 GF 60 black (2497)
PA6 GF60
AKROMID® B3 GF 60 black (2497) is a 60% glass fibre reinforced polyamide 6 with very high rigidity and strength
21.000MPa
240MPa
90kJ/m²
AKROMID® B3 GF 60 black (2497) is a 60% glass fibre reinforced polyamide 6 with very high rigidity and strength
AKROMID®
B3 GF 40 5 black (8636)PA6 GF40
AKROMID® B3 GF 40 5 black (8636) is a 40% glass fiber reinforced polyamide 6. It is characterized by high rigidity and strength. This grade was developed as a successor of AKROMID® B3 GF 40 5 black (7286) to meet the stringent UV stability requirements for outdoor applications. In addition, the material is stabilized at high temperatures and is therefore ideally suited for technical components in mechanical engineering, the automotive and agricultural industries.
Features
Properties
12.500MPa
200MPa
95kJ/m²
Mechanical Properties
Tensile modulus
ISO 527-2
Tensile stress at break
ISO 527-2
Tensile strain at break
ISO 527-2
Charpy impact strength
ISO 179-1/1eU
Thermal Properties
Melting temperature
ISO 11357-3
Flammability
Burning rate
UL 94
Burning rate (<100 mm/min)
FMVSS 302
General properties
Density
ISO 1183
Molding shrinkage
ISO 294-4
Disclaimer
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.
Contact
Do you have any questions? We are happy to help.
Would you like to learn more about AKRO-PLASTIC GmbH? Contact us! We will be happy to help you.