Find the right compound
Select your fitting and find the right compound for your intend
AKROMIDĀ®
B3 GK 15 natural (1824)
PA6 GB15
AKROMIDĀ® B3 GK 15 natural (1824) - PA 6, 15% glass beads reinforced, good surface, low warpage
4.000MPa
85MPa
30kJ/mĀ²
AKROMIDĀ® B3 GK 15 natural (1824) - PA 6, 15% glass beads reinforced, good surface, low warpage
AKROMIDĀ®
B3 GM 10/20 1 black (1829)
PA6 (GF10+GB20)
AKROMIDĀ® B3 GM 10/20 1 black 950058 (1829) is a 10% glass fibre reinforced, 20% glass bead filled, heat stabilised polyamide 6 with good surface and low warpage
6.200MPa
115MPa
45kJ/mĀ²
AKROMIDĀ® B3 GM 10/20 1 black 950058 (1829) is a 10% glass fibre reinforced, 20% glass bead filled, heat stabilised polyamide 6 with good surface and low warpage
AKROMIDĀ®
A3 1 black (2417)
PA66
AKROMIDĀ® A3 1 black (2417) is a heat stabilised, unreinforced polyamide 6.6
3.200MPa
85MPa
180kJ/mĀ²
AKROMIDĀ® A3 1 black (2417) is a heat stabilised, unreinforced polyamide 6.6
AKROMIDĀ®
A3 1 natural (2416)
PA66
AKROMIDĀ® A3 1 natural (2416) - heat stabilised, unreinforced polyamide 6.6
3.200MPa
85MPa
180kJ/mĀ²
AKROMIDĀ® A3 1 natural (2416) - heat stabilised, unreinforced polyamide 6.6
AKROMIDĀ®
A3 GK 30 black (2306)
PA66 GB30
AKROMIDĀ® A3 GK 30 black (2306) - PA 6.6, 30% glass beads reinforced, good surface, low warpage
5.000MPa
90MPa
28kJ/mĀ²
AKROMIDĀ® A3 GK 30 black (2306) - PA 6.6, 30% glass beads reinforced, good surface, low warpage
AKROMIDĀ®
B3 GF 40 1 natural (2466)
PA6 GF40
AKROMIDĀ® B3 GF 40 1 natural (2466) is a 40% glass fibre reinforced, heat stabilised polyamide 6 with high rigidity and strength and light inherent color
12.800MPa
205MPa
100kJ/mĀ²
AKROMIDĀ® B3 GF 40 1 natural (2466) is a 40% glass fibre reinforced, heat stabilised polyamide 6 with high rigidity and strength and light inherent color
AKROMIDĀ®
B3 GF 60 natural (2476)
PA6 GF60
AKROMIDĀ® B3 GF 60 natural (2476) is a 60% glass fibre reinforced polyamide 6 with very high rigidity and strength and light inherent color
21.000MPa
240MPa
90kJ/mĀ²
AKROMIDĀ® B3 GF 60 natural (2476) is a 60% glass fibre reinforced polyamide 6 with very high rigidity and strength and light inherent color
AKROMIDĀ®
B3 GF 30 1 L natural (4684)PA6+PP GF30
AKROMIDĀ® B3 GF 30 1 L natural (4684) is a PA6/PP-blend with reduced density compared to standard PA6 with 30% glass fibre reinforcement. The material is suitable for components with high strength and stiffness where cost and weight reduction are required at the same time. The chemical resistance of AKROMIDĀ® B3 GF 30 1 L natural (4684) is particularly superior to calcium chloride (CaClā).
Features
Properties
8.500MPa
150MPa
70kJ/mĀ²
Mechanical Properties
Tensile modulus
ISO 527-2
Tensile stress at break
ISO 527-2
Tensile strain at break
ISO 527-2
Flexural modulus
ISO 178
Flexural strength
ISO 178
Flexural strain at break
ISO 178
Charpy impact strength
ISO 179-1/1eU
Charpy notched impact strength
ISO 179-1/1eA
Thermal Properties
Temperature of deflection under load HDT/A
ISO 75
Melting temperature
ISO 11357-3
Flammability
Burning rate
UL 94
Burning rate (<100 mm/min)
FMVSS 302
General properties
Density
ISO 1183
Molding shrinkage
ISO 294-4
Rheological Properties
MVR
ISO 1133
Disclaimer
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKROĀ®, AKROMIDĀ®, AKROLENĀ®, AKROLOYĀ®, AKROTEKĀ®, ICXĀ® and PRECITEĀ® are registered trademarks of the Feddersen Group.
Contact
Do you have any questions? We are happy to help.
Would you like to learn more about AKRO-PLASTIC GmbH? Contact us! We will be happy to help you.