PRECITE®

Preliminary

K GF 50 8 black (8446)PBT+PET GF50

PRECITE® K GF 50 8 black (8446) is a 50% glass fibre reinforced PBT/PET with very high strength. Due to its low moisture absorption, this material has very good dimensional stability. This grade corresponds to the European food guideline EU 10/2011 and to the American FDA 21 CFR. Because of its very good surface, it is perfectly suited for kitchen and household appliances.

Features

surface modified
reduced moisture

Regulatory

eu102011fda

Properties

Modulus

17.500MPa

Strength

175MPa

Impact

60kJ/m²

Mechanical Properties


Tensile modulus

ISO 527-2

1 mm/min | d.a.m.
17500 MPa

Tensile stress at break

ISO 527-2

5 mm/min | d.a.m.
175 MPa

Tensile strain at break

ISO 527-2

5 mm/min | d.a.m.
1,9 %

Charpy impact strength

ISO 179-1/1eU

23°C | d.a.m.
60 kJ/m²

Charpy notched impact strength

ISO 179-1/1eA

23°C | d.a.m.
12 kJ/m²

Thermal Properties


Melting temperature

ISO 11357-3

DSC, 10K/min
250 °C

General properties


Density

ISO 1183

23°C
1,75 g/cm³

Disclaimer

All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.