Menu Career Language: EN/DE
Preliminary datasheet

PA6 – Polyamide 6 PA6 GF60

AKROMID® B28 GF 60 9 black (7967)

21000 MPa

250 MPa

90 kJ/m²

AKROMID® B28 GF 60 9 black (7967) is a 60% glass fibre reinforced, process improved, easy flowing polyamide 6 with very high stiffness and strength.

Typical applications

Components in mechanical engineering and the automotive industry.

Processing information

The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.


6 Drying time 0 - 4 h

Drying temperature (τ ≤ -30°C) 80°C

Processing moisture 0,02 - 0,1%

1 Feed section 60 - 80°C

2 Temperature zone 1 - Zone 4 240 - 290°C

3 Nozzle temperature 260 - 300°C

4 Melt temperature 270 - 290°C

5 Mold temperature 80 - 100°C

P Nach Holding pressure, spec. 300 - 800 bar

P Stau Back pressure, spec. 50 - 150 bar

Injection speed medium to high

Screw speed 8 - 15 m/min

  • Mechanical Properties
    Tensile modulus (1 mm/min | ISO 527-2)
    d.a.m. 21000 MPa
    conditioned 13500 MPa

    Stress at break (5 mm/min | ISO 527-2)
    d.a.m. 250 MPa
    conditioned 160 MPa

    Strain at break (5 mm/min | ISO 527-2)
    d.a.m. 2,3 %
    conditioned 3 %

    Charpy impact strength (23°C | ISO 179-1/1eU)
    d.a.m. 90 kJ/m²
    conditioned 95 kJ/m²

    Charpy notched impact strength (23°C | ISO 179-1/1eA)
    d.a.m. 20 kJ/m²
    conditioned 25 kJ/m²

  • Thermal Properties
    Temperature of deflection under load HDT/A (1,8 MPa | ISO 75) 220 °C

    Temperature of deflection under load HDT/B (0,45 MPa | ISO 75) 220 °C

    Melting temperature (DSC, 10K/min | DIN EN 11357-1) 220 °C

  • Flammability
    Burning rate (UL 94)
    1,6mm Wall thickness HB Class

    Burning rate (<100 mm/min) (> 1 mm Thickness | FMVSS 302) +

  • General properties
    Density (23°C | ISO 1183) 1,7 g/cm³

    Humidity absorption (70°C, 62% r.H. | ISO 1110) 0,9 - 1,2 %

  • Rheological Properties
    Flowability (1mm Thickness | AKRO) 170 mm

    Flowability (2mm Thickness | AKRO) 560 mm

Disclaimer

All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.

You have questions about our products?

With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.

CONTACT US NOW