PA6 – Polyamide 6 PA6 + PP GF20
AKROMID® B3 GF 20 9 L white (7802)
AKROMID® B3 GF 20 9 L white (7802) is a 20% glass fibre reinforced, process optimised polyamide-blend with a reduced density compared to standard PA6 GF 20, white coloured.
Technical components in the automotive and electronic industry, where a weight reduction is required
The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.
|Drying time||0 - 4 h|
|Drying temperature (τ ≤ -30°C)||80°C|
|Processing moisture||0,02 - 0,1%|
|Feed section||60 - 80°C|
|Temperature zone 1 - Zone 4||220 - 290°C|
|Nozzle temperature||240 - 300°C|
|Melting temperature||240 - 290°C|
|Mold temperature||70 - 100°C|
|Holding pressure, spec.||300 - 800 bar|
|Back pressure, spec.||50 - 150 bar|
|Injection speed||medium to high|
|Screw speed||5 - 15 m/min|
- Mechanical Properties
Tensile modulus (1 mm/min | ISO 527-2) d.a.m. 6500 MPa Stress at break (5 mm/min | ISO 527-2) d.a.m. 115 MPa Strain at break (5 mm/min | ISO 527-2) d.a.m. 4,0 % Charpy notched impact strength (23°C | ISO 179-1/1eA) d.a.m. 13 kJ/m²
- Thermal Properties
Melting temperature (DSC, 10K/min | DIN EN 11357-1) 220 °C
- General properties
Density (23°C | ISO 1183) 1,21 g/cm³ Humidity absorption (70°C, 62% r.F. | ISO 1110) 1,6-1,8 %
- Rheological Properties
MVR (275°C/5kg | ISO 1133) 21 cm³/10min
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.
You have questions about our products?
With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.CONTACT US NOW