MenuCareer Languages: EN/DE/PT
Preliminary datasheet

PA6 – Polyamide 6 PA6

AKROMID® B+ 6 black (7680)

High-heat stabilized PA6 compound with enhanced mechanical properties in conditioned state to substitute PA 66 compounds

Typical applications

Components in mechanical engineering and in the automotive industry

Processing information

The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.


6Drying time0 - 4 h

Drying temperature (τ ≤ -30°C)80°C

Processing moisture0,02 - 0,1%

1Feed section60 - 80°C

2Temperature zone 1 - Zone 4220 - 270°C

3Nozzle temperature230 - 300°C

4Melting temperature240 - 270°C

5Mold temperature40 - 80°C

P NachHolding pressure, spec.300 - 800 bar

P StauBack pressure, spec.50 - 150 bar

Injection speedmedium to high

Screw speed8 - 15 m/min

  • Mechanical Properties
    Tensile modulus (1 mm/min | ISO 527-2)
    d.a.m.2900 MPa

    Stress at yield (50 mm/min | ISO 527-2)
    d.a.m.75 MPa

    Strain at break (50 mm/min | ISO 527-2)
    d.a.m.>20 %

    Charpy impact strength (23°C | ISO 179-1/1eU)
    d.a.m.n.B.

    Charpy notched impact strength (23°C | ISO 179-1/1eA)
    d.a.m.7 kJ/m²

  • Flammability
    Burning rate (<100 mm/min) (> 1 mm Thickness | FMVSS 302) +

  • General properties
    Density (23°C | ISO 1183)1,13 g/cm³

Disclaimer

All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.

You have questions about our products?

With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.

CONTACT US NOW