PA6 – Polyamide 6 PA6+PA66 GF30 FR(40)
AKROMID® C3 GF 30 1 FR white (7630)AKROMID® C3 GF 30 1 FR white (7630) is a 30 % glass fiber reinforced, flame retardant and heat stabilised PA6/6.6 blend, colored in white similar to RAL 9016. Listed to UL 94 in all-colours, the material is based on a flame retardant system that is free of red phosphorus and halogens. Due to its good flowability, an improved surface quality is achieved. This grade is also suitable E&E applications (e.g. control cabinets) as well as for railroad applications and meets the requirements for public transportation (EN 45545-2 R22/23/24 HL3).
Properties
Tensile Modulus Tensile Strength Impact StrengthFeatures
-
Mechanical Properties
Tensile modulus (1 mm/min | ISO 527-2) d.a.m. 10600 MPa
Stress at break (5 mm/min | ISO 527-2) d.a.m. 140 MPa
Strain at break (5 mm/min | ISO 527-2) d.a.m. 2,6 %
Charpy notched impact strength (23°C | ISO 179-1/1eA) d.a.m. 10 kJ/m²
-
Thermal Properties
Melting temperature (DSC, 10K/min | DIN EN ISO 11357-3) 262 °C
-
Flammability
Burning rate (UL 94) 0,8mm Wall thickness V-0 Class 1,6mm Wall thickness V-0 Class 3,2mm Wall thickness V-0 Class
GWFI (IEC 60695-2-12) 0,4mm Wall thickness 960 °C 0,8mm Wall thickness 960 °C 1,6mm Wall thickness 960 °C 3,2mm Wall thickness 960 °C
GWIT (IEC 60695-2-13) 0,4mm Wall thickness 725 °C 0,8mm Wall thickness 725 °C 1,6mm Wall thickness 725 °C 3,2mm Wall thickness 775 °C
HWI (UL 746A) 0,4mm Wall thickness 0 PLC 0,8mm Wall thickness 0 PLC 1,6mm Wall thickness 0 PLC 3,2mm Wall thickness 0 PLC
HAI (UL 746A) 0,4mm Wall thickness 0 PLC 0,8mm Wall thickness 0 PLC 1,6mm Wall thickness 0 PLC 3,2mm Wall thickness 0 PLC
Protection Train (EN 45545-2) R22/R23/R24 HL3
-
General properties
Density (23°C | ISO 1183) 1,47 g/cm³
-
Electrical Properties
Comparative tracking index (Test liquid A | IEC 60112) >600 V
Processing information
The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.
Drying time | 2 - 4 h | |
Drying temperature (τ ≤ -30°C) | 80°C | |
Processing moisture | 0,02 - 0,08% | |
Feed section | 60 - 80°C | |
Temperature zone 1 - Zone 4 | 260 - 290°C | |
Nozzle temperature | 260 - 300°C | |
Melt temperature | 280 - 290°C | |
Mold temperature | 60 - 100°C | |
Holding pressure, spec. | 300 - 800 bar | |
Back pressure, spec. | 30 - 100 bar | |
Injection speed | medium | |
Screw speed | 5 - 10 m/min | |
Disclaimer
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.