MenuCareer Languages: EN/DE/PT
Preliminary datasheet

PEEK – Polyetheretherketone PEEK M15

AKROTEK® PEEK M 15 8 black (7532)

AKROTEK® PEEK M 15 8 black (7532) is an 15% mineral-filled polyetheretherketone with FDA compliant ingredients, very good surface and slight tendency to warp

Typical applications

Elements in the automotive-, aeronautical-, industrial- and medical engineering that require low friction and wear values in a temperature environment above 150°C.

Processing information

The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.


6Drying time2 - 3 h

Drying temperature (τ ≤ -30°C)150 - 160°C

Processing moisture< 0,02%

1Feed section60 - 80°C

2Temperature zone 1 - Zone 4350 - 380°C

3Nozzle temperature390°C

4Melting temperature370 - 390°C

5Mold temperature160 - 200°C

P NachHolding pressure, spec.300 - 800 bar

P StauBack pressure, spec.50 bar

Injection speedmedium to high

Screw speed5 - 10 m/min

  • Mechanical Properties
    Tensile modulus (1 mm/min | ISO 527-2)
    d.a.m.4200 MPa

    Stress at yield (50 mm/min | ISO 527-2)
    d.a.m.98 MPa

    Strain at break (50 mm/min | ISO 527-2)
    d.a.m.20 %

    Charpy notched impact strength (23°C | ISO 179-1/1eA)
    d.a.m.6 kJ/m²

  • Thermal Properties
    Glass transition temperature (DSC, 2nd heating | DIN EN 11357-1)150 °C

    Melting temperature (DSC, 10K/min | DIN EN 11357-1)342 °C

  • Flammability
    Burning rate (UL 94)
    1,6mm Wall thicknessV0 Class

  • General properties
    Density (23°C | ISO 1183)1,45 g/cm³

Disclaimer

All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.

You have questions about our products?

With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.

CONTACT US NOW