PA6 – Polyamide 6 PA6 GF 25 FR
AKROMID® B3 GF 25 FRT black (7148)
AKROMID® B3 GF 25 FRT black (7148) is a 25% glass fibre reinforced, halogenfree flame retardant polyamide 6 with high stiffness and strength.
Typical applications
Special applications in the railway sector, e.g. Armrests, removable headrests or small-volume non-listed components
Processing information
The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.
Drying time | 2 - 4 h | |
Drying temperature (τ ≤ -30°C) | 80°C | |
Processing moisture | 0,02 - 0,08% | |
Feed section | 60 - 80°C | |
Temperature zone 1 - Zone 4 | 220 - 280°C | |
Nozzle temperature | 240 - 280°C | |
Melting temperature | 240 - 280°C | |
Mold temperature | 60 - 100°C | |
Holding pressure, spec. | 300 - 800 bar | |
Back pressure, spec. | 30 - 100 bar | |
Injection speed | medium | |
Screw speed | 5 - 10 m/min | |
- Mechanical Properties
Tensile modulus (1 mm/min | ISO 527-2) d.a.m. 9700 MPa conditioned 5500 MPa Stress at break (5 mm/min | ISO 527-2) d.a.m. 135 MPa conditioned 90 MPa Strain at break (5 mm/min | ISO 527-2) d.a.m. 2,6 % conditioned 7 % Charpy impact strength (23°C | ISO 179-1/1eU) d.a.m. 65 kJ/m² - Thermal Properties
Melting temperature (DSC, 10K/min | DIN EN 11357-1) 222 °C - Flammability
Burning rate UL 94 0,8mm Wall thickness (UL 94) V1 Class Burning rate UL 94 1,6mm Wall thickness (UL 94) V0 Class Burning rate UL 94 3,2mm Wall thickness (UL 94) V0 Class GWFI 0,8 mm Wall thickness (IEC 60695-2-12) 960 °C GWFI 1,6 mm Wall thickness (IEC 60695-2-12) 960 °C GWFI 3,2 mm Wall thickness (IEC 60695-2-12) 960 °C Oxygen index (ISO 4589-2) >32 % Burning rate (<100 mm/min) (> 1 mm Thickness | FMVSS 302) + Protection Train (EN 45545-2) R21/22/23/24 HL3 - General properties
Density (23°C | ISO 1183) 1,39 g/cm³ Molding shrinkage (flow | ISO 294-4) 0,2-0,4 % Molding shrinkage (transverse | ISO 294-4) 0,6-0,8 %
Disclaimer
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.
You have questions about our products?
With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.
CONTACT US NOW