PA6 – Polyamide 6 PA6 GF33
AKROMID® B28 GF 33 1 GIT black (6846)
AKROMID® B28 GF 33 1 GIT black (6846) is a 33% glass fibre reinforced, heat stabilised, easy flowing polyamide 6 with very high stiffness and strength for gas injection technology.
Typical applications
Engineering parts, which are produced by gas injection technology. Furthermore B28 GF 33 1 GIT black (6846) can be used for standard injection moulding for demanding surface quality.
Processing information
The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.
Drying time | 0 - 4 h | |
Drying temperature (τ ≤ -30°C) | 80°C | |
Processing moisture | 0,02 - 0,1% | |
Feed section | 60 - 80°C | |
Temperature zone 1 - Zone 4 | 240 - 290°C | |
Nozzle temperature | 260 - 300°C | |
Melt temperature | 270 - 290°C | |
Mold temperature | 80 - 100°C | |
Holding pressure, spec. | 300 - 800 bar | |
Back pressure, spec. | 50 - 150 bar | |
Injection speed | medium to high | |
Screw speed | 8 - 15 m/min | |
-
Mechanical Properties
Tensile modulus (1 mm/min | ISO 527-2) d.a.m. 10500 MPa conditioned 6600 MPa
Stress at break (5 mm/min | ISO 527-2) d.a.m. 190 MPa conditioned 120 MPa
Strain at break (5 mm/min | ISO 527-2) d.a.m. 3 % conditioned 4,5 %
Flexural modulus (2 mm/min | ISO 178) d.a.m. 9000 MPa
Flexural strength (2 mm/min | ISO 178) d.a.m. 275 MPa
Charpy impact strength (23°C | ISO 179-1/1eU) d.a.m. 95 kJ/m² conditioned 105 kJ/m²
Charpy notched impact strength (23°C | ISO 179-1/1eA) d.a.m. 14 kJ/m² conditioned 18 kJ/m²
-
Thermal Properties
Melting temperature (DSC, 10K/min | DIN EN 11357-1) 220 °C
-
Flammability
Burning rate (UL 94) 1,6mm Wall thickness HB Class
Burning rate (<100 mm/min) (> 1 mm Thickness | FMVSS 302) +
-
General properties
Density (23°C | ISO 1183) 1,38 g/cm³
Humidity absorption (70°C, 62% r.H. | ISO 1110) 1,8 %
-
Rheological Properties
MVR (275°C/5kg | ISO 1133) 40 cm³/10min
Disclaimer
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.
You have questions about our products?
With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.
CONTACT US NOW