MenuCareer Language: EN/DE

PPA – Polyphthalamide PPA GF50

AKROMID® T5 GF 50 8 natural (6464)

18000 MPa

300 MPa

105 kJ/m²

AKROMID® T5 GF 50 8 natural (6464) is a 50% glass fibre reinforced polyphthalamide with very high rigidity and strength, as well as high temperature and chemical resistance.

This aromatic PPA keeps mechanical performance even at elevated temperatures or moisture pic-up.

The material fulfills the requirements according to KTW, DVGW W270, ACS, WRAS as well as NSF. It is suitable for applications that are in contact with cold and hot drinking water as well as food.

Typical applications

Mainly components in domestic and industrial applications that are in contact with food or drinking water, requiring strength and durability even at high temperatures or moist conditions.

Regulatory

ACS EU10-2011 FDA KTW_cold W270 WRAS

Processing information

The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.


6 Drying time 0 - 4 h

Drying temperature (τ ≤ -30°C) 120°C

Processing moisture 0,02 - 0,1%

1 Feed section 60 - 90°C

2 Temperature zone 1 - Zone 4 320 - 350°C

3 Nozzle temperature 330 - 350°C

4 Melt temperature 330 - 350°C

5 Mold temperature 120 - 160°C

P Nach Holding pressure, spec. 300 - 800 bar

P Stau Back pressure, spec. 50 - 150 bar

Injection speed medium to high

Screw speed 8 - 15 m/min

  • Mechanical Properties
    Tensile modulus (1 mm/min | ISO 527-2)
    d.a.m. 18000 MPa
    conditioned 18000 MPa

    Stress at break (5 mm/min | ISO 527-2)
    d.a.m. 300 MPa
    conditioned 300 MPa

    Strain at break (5 mm/min | ISO 527-2)
    d.a.m. 2,5 %
    conditioned 2,5 %

    Flexural modulus (2 mm/min | ISO 178)
    d.a.m. 18500 MPa
    conditioned 18500 MPa

    Flexural strength (2 mm/min | ISO 178)
    d.a.m. 410 MPa
    conditioned 350 MPa

    Standard bending strength RP 3,5 (2 mm/min | ISO 178)
    d.a.m. 2,5 MPa

    Charpy impact strength (23°C | ISO 179-1/1eU)
    d.a.m. 105 kJ/m²
    conditioned 105 kJ/m²

    Charpy impact strength (-30°C | ISO 179-1/1eU)
    d.a.m. 75 kJ/m²
    conditioned 75 kJ/m²

    Charpy notched impact strength (23°C | ISO 179-1/1eA)
    d.a.m. 13 kJ/m²
    conditioned 13 kJ/m²

  • Thermal Properties
    Temperature of deflection under load HDT/A (1,8 MPa | ISO 75) 280 °C

    Melting temperature (DSC, 10K/min | DIN EN 11357-1) 325 °C

  • Flammability
    Burning rate (UL 94)
    1,6mm Wall thickness HB Class

  • General properties
    Density (23°C | ISO 1183) 1,65 g/cm³

    Humidity absorption (70°C, 62% r.H. | ISO 1110) 0,8 %

    Molding shrinkage (flow | ISO 294-4) 0,1-0,3 %

    Molding shrinkage (transverse | ISO 294-4) 0,4-0,6 %

Disclaimer

All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.

You have questions about our products?

With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.

CONTACT US NOW