MenuCareer Languages: EN/DE/PT
Preliminary datasheet

PA6.6 – Polyamide 6.6 PA66 GF50

AKROMID® A3 GF 50 6 natural (5916)

AKROMID® A3 GF 50 6 natural (5916) is a 50% glass fibre reinforced, inorganic high heat stabilised polyamide 6.6 with very high stiffness and strength

Typical applications

Functional parts in mechanical engineering and the automotive industry

Processing information

The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.


6Drying time0 - 4 h

Drying temperature (τ ≤ -30°C)80°C

Processing moisture0,02 - 0,1%

1Feed section60 - 80°C

2Temperature zone 1 - Zone 4260 - 300°C

3Nozzle temperature270 - 310°C

4Melting temperature280 - 300°C

5Mold temperature80 - 100°C

P NachHolding pressure, spec.300 - 800 bar

P StauBack pressure, spec.50 - 150 bar

Injection speedmedium to high

Screw speed8 - 15 m/min

  • Mechanical Properties
    Tensile modulus (1 mm/min | ISO 527-2)
    d.a.m.17000 MPa

    Stress at break (5 mm/min | ISO 527-2)
    d.a.m.270 MPa

    Strain at break (5 mm/min | ISO 527-2)
    d.a.m.2,8 %

    Charpy impact strength (23°C | ISO 179-1/1eU)
    d.a.m.105 kJ/m²

    Charpy notched impact strength (23°C | ISO 179-1/1eA)
    d.a.m.20 kJ/m²

  • Thermal Properties
    Melting temperature (DSC, 10K/min | DIN EN 11357-1)262 °C

  • General properties
    Density (23°C | ISO 1183)1,57 g/cm³

Disclaimer

All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.

You have questions about our products?

With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.

CONTACT US NOW