PARA – Polyaramide PARA CF50
AKROLOY® PARA CF 50 black (5912)
AKROLOY® PARA CF 50 schwarz (5912) is a 50% carbon fibre reinforced polyarylamid with good flexural strength and tribological properties as well as reduced moisture.
Components with high dimensional stability, independent from moisture content.
The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.
|Drying time||4 - 12 h|
|Drying temperature (τ ≤ -30°C)||80 - 90°C|
|Processing moisture||0,02 - 0,1%|
|Feed section||60 - 80°C|
|Temperature zone 1 - Zone 4||250 - 300°C|
|Nozzle temperature||270 - 300°C|
|Melt temperature||270 - 300°C|
|Mold temperature||120 - 160°C|
|Holding pressure, spec.||300 - 1500 bar|
|Back pressure, spec.||50 - 150 bar|
|Screw speed||8 - 10 m/min|
- Mechanical Properties
Tensile modulus (1 mm/min | ISO 527-2) d.a.m. 44700 MPa Stress at break (5 mm/min | ISO 527-2) d.a.m. 295 MPa Strain at break (5 mm/min | ISO 527-2) d.a.m. 0,8 % Flexural modulus (2 mm/min | ISO 178) d.a.m. 44500 MPa Flexural strength (2 mm/min | ISO 178) d.a.m. 490 MPa Standard bending strength RP 3,5 (2 mm/min | ISO 178) d.a.m. 1,2 MPa Charpy impact strength (23°C | ISO 179-1/1eU) d.a.m. 42 kJ/m² Charpy notched impact strength (23°C | ISO 179-1/1eA) d.a.m. 7 kJ/m²
- Thermal Properties
Melt temperature (DSC, 10K/min | DIN EN 11357-1) 235 °C
Burning rate (UL 94) 1,6mm Wall thickness HB Class
- General properties
Density (23°C | ISO 1183) 1,45 g/cm³
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.
You have questions about our products?
With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.CONTACT US NOW