PEEK – Polyetheretherketone PEEK GF30
AKROTEK® PEEK GF 30 natural (5047)
AKROTEK® PEEK GF 30 natural (5047) is a 30% glass fibre reinforced polyetheretherketone with high stiffness and strength.
Elements in the automotive-, aeronautical-, industrial- and medical engineering that require high strength in a temperature environment above 150°C.
The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.
|Drying time||2 - 3 h|
|Drying temperature (τ ≤ -30°C)||150 - 160°C|
|Processing moisture||< 0,02%|
|Feed section||60 - 80°C|
|Temperature zone 1 - Zone 4||365 - 390°C|
|Melting temperature||370 - 400°C|
|Mold temperature||160 - 200°C|
|Holding pressure, spec.||300 - 800 bar|
|Back pressure, spec.||50 bar|
|Injection speed||medium to high|
|Screw speed||5 - 10 m/min|
- Mechanical Properties
Tensile modulus (1 mm/min | ISO 527-2) d.a.m. 12000 MPa conditioned 12000 MPa Stress at break (5 mm/min | ISO 527-2) d.a.m. 195 MPa conditioned 185 MPa Strain at break (5 mm/min | ISO 527-2) d.a.m. 2,8 % conditioned 2,8 % Flexural modulus (2 mm/min | ISO 178) d.a.m. 11500 MPa Flexural strength (2 mm/min | ISO 178) d.a.m. 305 MPa Flexural strain at break (2 mm/min | ISO 178) d.a.m. 3 % Charpy impact strength (23°C | ISO 179-1/1eU) d.a.m. 80 kJ/m² conditioned 75 kJ/m² Charpy notched impact strength (23°C | ISO 179-1/1eA) d.a.m. 11 kJ/m² conditioned 11 kJ/m²
- Thermal Properties
Temperature of deflection under load HDT/A (1,8 MPa | ISO 75) > 280 °C Temperature of deflection under load HDT/C (8 MPa | ISO 75) 200 °C Melting temperature (DSC, 10K/min | DIN EN 11357-1) 342 °C
Burning rate (UL 94) 1,6mm Wall thickness V0 Class
- General properties
Density (23°C | ISO 1183) 1,5 g/cm³ Humidity absorption (70°C, 62% r.F. | ISO 1110) 0,1 - 0,2 %
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX® and PRECITE® are registered trademarks of the Feddersen Group.
You have questions about our products?
With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.CONTACT US NOW