PK – Polyketone PK GF30
AKROTEK® PK-VM GF 30 nature (4706)
AKROTEK® PK-VM GF 30 natural (4706) is a 30% glass fibre reinforced, low viscous polyketone with high stiffness and strength and light inherent color.
Components in mechanical engineering and the automotive industry.
The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.
|Drying time||0 - 4 h|
|Processing moisture||0,02 - 0,1%|
|Feed section||60 - 80°C|
|Temperature zone 1 - Zone 4||220 - 260°C|
|Nozzle temperature||230 - 260°C|
|Melting temperature||230 - 260°C|
|Mold temperature||60 - 120°C|
|Holding pressure, spec.||300 - 800 bar|
|Back pressure, spec.||30 - 70 bar|
|Injection speed||medium to high|
|Screw speed||8 - 15 m/min|
The molding machine needs to be purged with polyolefines before and after processing of AKROTEK® PK! There is a risk of cross linking caused by reactions with POM or PA as well as unsuitable master batches! Cross linking is visible through dark spots! In this case purge immediately with polyolefines.
- Mechanical Properties
Tensile modulus (1 mm/min | ISO 527-2) d.a.m. 8000 MPa conditioned 7700 MPa Stress at break (5 mm/min | ISO 527-2) d.a.m. 115 MPa conditioned 100 MPa Flexural modulus (2 mm/min | ISO 178) d.a.m. 8200 MPa Flexural strength (2 mm/min | ISO 178) d.a.m. 165 MPa Charpy impact strength (23°C | ISO 179-1/1eU) d.a.m. 45 kJ/m² conditioned 35 kJ/m² Charpy impact strength (-30°C | ISO 179-1/1eU) d.a.m. 45 kJ/m² Charpy impact strength (-40°C | ISO 179-1/1eU) d.a.m. 45 kJ/m² Charpy notched impact strength (23°C | ISO 179-1/1eA) d.a.m. 15 kJ/m² conditioned 15 kJ/m² Charpy notched impact strength (-30°C | ISO 179-1/1eA) d.a.m. 12 kJ/m² Charpy notched impact strength (-40°C | ISO 179-1/1eA) d.a.m. 12 kJ/m²
- Thermal Properties
Temperature of deflection under load HDT/A (1,8 MPa | ISO 75) 215 °C Melting temperature (DSC, 10K/min | DIN EN 11357-1) 220 °C
Burning rate UL 94 1,6mm Wall thickness (UL 94) HB Class GWFI 1,6 mm Wall thickness (IEC 60695-2-12) 725 °C GWIT 1,6 mm Wall thickness (IEC 60695-2-12) 750 °C
- General properties
Density (23°C | ISO 1183) 1,48 g/cm³ Humidity absorption (70°C, 62% r.F. | ISO 1110) 0,6 - 0,7 % Molding shrinkage (flow | ISO 294-4) 0,4 % Molding shrinkage (transverse | ISO 294-4) 1,0 %
- Electrical Properties
Volume resistivity (IEC 60093) d.a.m. 1,0E+13 Ohm x cm conditioned 1,0E+10 Ohm x cm Surface resistivity (acc. to IEC 60093) d.a.m. 1,0E+12 Ohm conditioned 1,0E+10 Ohm
All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK® and ICX® are registered trademarks of the Feddersen Group.
You have questions about our products?
With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.CONTACT US NOW