PA6 – Polyamide 6 PA6 + PP GF30

• Mechanical Properties

  Tensile modulus (1 mm/min | ISO 527-2)	d.a.m.	8500 MPa
  	conditioned	6500 MPa

  ---

  Stress at break (5 mm/min | ISO 527-2)	d.a.m.	150 MPa
  	conditioned	100 MPa

  ---

  Strain at break (5 mm/min | ISO 527-2)	d.a.m.	3,2 %
  	conditioned	3,7 %

  ---

  Flexural modulus (2 mm/min | ISO 178)	d.a.m.	8800 MPa
  	conditioned	6500 MPa

  ---

  Flexural strength (2 mm/min | ISO 178)	d.a.m.	210 MPa
  	conditioned	150 MPa

  ---

  Flexural strain at break (2 mm/min | ISO 178)	d.a.m.	3 %
  	conditioned	3,9 %

  ---

  Charpy impact strength (23°C | ISO 179-1/1eU)

  d.a.m.

  70 kJ/m²

  ---

  Charpy notched impact strength (23°C | ISO 179-1/1eA)

  d.a.m.

  17 kJ/m²

  ---

• Thermal Properties

  Temperature of deflection under load HDT/A (1,8 MPa | ISO 75)

  203 °C

  ---

  Melting temperature (DSC, 10K/min | DIN EN ISO 11357-3)

  220 °C

  ---

• Flammability

  Burning rate (UL 94)
  0,8mm Wall thickness	HB Class

  ---

  Burning rate (<100 mm/min) (> 1 mm Thickness | FMVSS 302)

  +

  ---

• General properties

  Density (23°C | ISO 1183)

  1,26 g/cm³

  ---

  Molding shrinkage (flow | ISO 294-4)

  0,1 - 0,3 %

  ---

  Molding shrinkage (transverse | ISO 294-4)

  0,5 - 0,7 %

  ---

• Rheological Properties

  MVR (275°C/5kg | ISO 1133)

  14 cm³/10min

  ---

Processing information

The listed values are recommendations. Higher values should be used for higher glass loadings. We recommend only de-humidifying or vacuum dryers. Extensive drying can cause filling problems and surface defects.

	Drying time	0 - 4 h
	Drying temperature (τ ≤ -30°C)	80°C
	Processing moisture	0,02 - 0,1%
	Feed section	60 - 80°C
	Temperature zone 1 - Zone 4	220 - 290°C
	Nozzle temperature	240 - 300°C
	Melt temperature	240 - 290°C
	Mold temperature	70 - 100°C
	Holding pressure, spec.	300 - 800 bar
	Back pressure, spec.	50 - 150 bar
	Injection speed	medium to high
	Screw speed	5 - 15 m/min