PRECITE® ECO

Post-Consumer-Compounds
tree sunbeam
Recycling

Post-Consumer-Compound

Defining sustainability is an important part of daily work for companies today. In the plastics industry, too, there are many ways to design products sustainably. The demand for sustainable products is high, due to the climate neutrality to be achieved. AKRO-PLASTIC as a compound manufacturer faces this challenge and offers solutions with its polyester compounds. PRECITE® has an inherently lower CO2 footprint compared to other polymers, such as polyamide. In addition, AKRO-PLASTIC offers variants with recycled material from post-consumer applications (PRECITE® ECO).

Compounds from our PRECITE®K ECO product range are blends of PBT/rPET with a 25% PCR content. Despite the recycled material, PRECITE® K ECO does not suffer any losses in stiffness and strength as a PBT with a comparable filler content and is therefore able to replace PBT in many applications. In processing, there is the advantage that, unlike with pure PET or rPET, it is not necessary to produce a mold temperature of 140°C, but the temperatures of 80-100°C common with PBT are sufficient. In addition, the shrinkage is very similar, so that in many cases it is even possible to process the material true to size in existing PBT molds. Another advantage is the excellent surface quality.


"By switching from a PBT-based product, e.g. PRECITE® P3 GF 30 black (6924) to a PBT/rPET blend, e.g. PRECIT®E K GF 30 ECO black (8269), it is possible to save around 35% CO2 eq. The material can be used in existing molds and thus enables a fast changeover."

Claudia VahrenkampfProduct Manager

Facts and figures

Improvement of the carbon footprint

PA 6.6 GF 30
100
Icon percent
CO2 footprint
PBT
70
Icon percent
CO2 footprint
PBT/rpet
65
Icon percent
CO2 footprint

Disclaimer: All specifications and information given on this website are based on our current knowledge and experience. A legally binding promise of certain characteristics or suitability for a concrete individual case cannot be derived from this information. The information supplied here is not intended to release processors and users from the responsibility of carrying out their own tests and inspections in each concrete individual case. AKRO®, AKROMID®, AKROLEN®, AKROLOY®, AKROTEK®, ICX®, PRECITE® and DIA(hr)LOG® are registered trademarks of AKRO-PLASTIC GmbH.

Make an appointment

Talk to Our Experts

With a worldwide network of plastics distribution experts, we can provide you with support anywhere in the world. Talk to one of our specialists to find out more.

Kontakt
Header Kontakt